Notes - Armour requirements

From SCA Lochac
Revision as of 23:43, 28 May 2019 by Angele (talk | contribs)
Jump to navigation Jump to search


General

Responsibilities

Summary of Areas to be Armoured

Head

General

Underside of the chin; - September 2017
It is strongly recommended that the underside of the jaw be protected from a low-profile thrusting tip - Jon Dai of the Lane

Plumes

Face Guards

Mesh - December 2015
Ruling - mesh is required to protect the face, not the skull.
Mesh is required under Lochac rules to protect delicate facial features what would not survive an unintended helm penetration such as eyes and teeth.
Mesh is not required to fill the skull holes on Vendal style helmets. As with all armour, the design is to prevent traumatic and unrecoverable injury, pain however is up to the tolerance level of the individual and what level they are willing to accept. - Jarl Niall
Additional mesh types - June 2019
Materials that meet the standard for face protection during rapier combat are suitable to protect the face from arrows. - Angele de Savigny
Crimsafe - November 2004
"Crimsafe" has been approved for use as arrow mesh for helm face plates. (Although the gauge of the woven wire is less than previously allowed, the protection offered by this security mesh is superior to the current approved materials).

Eyewear

Neck

Groin

Groin armour - Oct 2018
Society rule update - The groin must be protected to a standard equivalent to that provided by an athletic cup or pubic protector, secured by straps, or worn in a supporter or fighting garment designed to hold the protection in place.
The prohibition on wearing groin protection designed for the opposite sex has been removed
The rules were updated to make things more inclusive for trans and non-binary participants. The prohibition against wearing the opposite gender's groin protection had been included due to marshals of the past requiring women to wear a male athletic cup.

Body

Arm

Hand

Hand armour- June 2018
Rule 7.11.1 - corrected to match Society minimum requirement for hand protection to extend to 26mm (1 inch) above the wrist. The footnote about coverage has been removed.

Leg

Knee armour - August 2016
An "air gap" alone is NOT equivalent padding. An air gap, does not protect the knee if a fighter drops to their knees suddenly (either purposely or as a result of a fall)
Knees need to be padded, in a way that is 6.35mm of resilient material or equivalent (read padding). For example, commercial sports knee pads. - Jarl Niall

Footwear

Shields

Noncombatant Armour Requirements

General

Head

Arm

Hand

Body

Leg