Difference between revisions of "User:Angele"

From SCA Lochac
Jump to navigation Jump to search
Line 74: Line 74:
   
 
;Cloak
 
;Cloak
 
 
;Draw cut
 
;Draw cut
 
;Tip cut
 
;Tip cut
Line 80: Line 79:
 
;Percussive cut
 
;Percussive cut
 
;Blade grasps
 
;Blade grasps
 
 
;Abrasion-Resistant Material
 
;Abrasion-Resistant Material
 
:Material that will withstand normal combat stresses (such as being snagged by an unbroken blade) without tearing. Examples include, but are not limited to:
 
:Material that will withstand normal combat stresses (such as being snagged by an unbroken blade) without tearing. Examples include, but are not limited to:
Line 88: Line 86:
 
:*Woven knit tights or lycra /spandex mix tights.
 
:*Woven knit tights or lycra /spandex mix tights.
 
:Nylon pantyhose and cotton gauze shirts are examples of unacceptable materials.
 
:Nylon pantyhose and cotton gauze shirts are examples of unacceptable materials.
 
 
;Puncture-Resistant Material
 
;Puncture-Resistant Material
 
:Any fabric or combination of fabrics that passes the Standard Fencing Armour Test set out under rule 3.2.1.5. Examples may include, but are not limited to:
 
:Any fabric or combination of fabrics that passes the Standard Fencing Armour Test set out under rule 3.2.1.5. Examples may include, but are not limited to:
Line 96: Line 93:
 
:*commercial fencing clothing rated to at least 550 Newtons.
 
:*commercial fencing clothing rated to at least 550 Newtons.
 
:Kevlar is not an acceptable material, as it degrades rapidly.
 
:Kevlar is not an acceptable material, as it degrades rapidly.
:Initially, these materials need only be tested at the marshal's discretion; all other materials must be tested the first time new equipment is used, or if no marshal on the field knows a given piece of equipment to have been tested under rule 3.1.5.
 
 
 
;Rigid Material
 
;Rigid Material
 
:Puncture-resistant materials that will not significantly flex, spread apart, or deform under pressure of 12 kg applied by a standard mask tester repeatedly to any single point. Examples of rigid material that may comply with the standard for Rigid Material are:
 
:Puncture-resistant materials that will not significantly flex, spread apart, or deform under pressure of 12 kg applied by a standard mask tester repeatedly to any single point. Examples of rigid material that may comply with the standard for Rigid Material are:
Line 104: Line 99:
 
:*One layer of hardened heavy leather (8oz, 4 mm).
 
:*One layer of hardened heavy leather (8oz, 4 mm).
 
:*The mesh of a standard fencing mask
 
:*The mesh of a standard fencing mask
 
 
;Resilient Padding
 
;Resilient Padding
 
:Any material or combination of materials - equivalent to 6mm (0.25 inches) of closed cell foam - which absorbs some of the force of a thrust or blow. The standard padded bib of a fencing mask may meet this requirement, depending on construction.
 
:Any material or combination of materials - equivalent to 6mm (0.25 inches) of closed cell foam - which absorbs some of the force of a thrust or blow. The standard padded bib of a fencing mask may meet this requirement, depending on construction.
  +
;Standard Fencing Armour Test (SFAT)
 
;Standard Fencing Armour Test (SFAT) (used for testing Puncture Resistant Material.)
+
;used for testing Puncture Resistant Material.
:Acceptable field inspections shall deliver a consistent force.
 
:Tests known to be acceptable include:
 
:*Cloth or garment manufacturer's commercial certification that a fabric is rated to 550 N. (Documentation must be available at the time of inspection.)
 
:*Use of 550 N garment punch test devices, manufactured by sources acceptable to the Deputy Society Marshal for Rapier Combat. Such a device shall be used in accordance with its instructions.
 
:*Use of a drop test device as described in instructions found in Appendix 3 of the Society Rapier Rules.
 
:For all tests, if the material in question has been completely penetrated, or penetrated in more than one protective layer, it fails. If only one protective layer (where other equivalent or sturdier layers exist) has been damaged, then it passes.
 
 
 
 
;Fleche
 
;Fleche
 
:running at an opponent with rapier extended
 
:running at an opponent with rapier extended
 
 
;Lists
 
;Lists
 
;Melee
 
;Melee
 
 
;Parrying Devices
 
;Parrying Devices
 
 
;Non-rigid parrying device
 
;Non-rigid parrying device
 
 
;Parrying Gauntlet
 
;Parrying Gauntlet
 
 
;Rubber band gun
 
;Rubber band gun
 
 
;Pole Weapon
 
;Pole Weapon
 
 
;Rapier (referred to as Heavy Rapier in the Society Rules)
 
;Rapier (referred to as Heavy Rapier in the Society Rules)
 
 
;Cut and Thrust Rapier.
 
;Cut and Thrust Rapier.

Revision as of 10:20, 28 May 2019

Armoured Combat - Fighters Handbook

Armoured Combat Editing Notes

Combat Authorisation Reqs

  • Update to lochac.sca.org urls where available
  • Suggest upping minimum age for banner bearers to 16. War is an armoured combat activity, and no armoured combatant may be under 16. It walks like a duck, sounds like a duck...

Armour requirement

  • Update as per rulings and clarifications in text of notes.

Melee Weapon standards

  • Footnote re towball covers can be removed but this exemption is now no longer relevant due to the existence of low-profile thrusting tips.
  • "Restraints are not required on great weapons or spears used single-handed, or on single-handed back-up weapons less than 45 centimetres in length." Society rules don't include a max length for back-up single-handed weapons not requiring lanyards. Is this a specifically Lochac thing?
  • incorporate changes from rulings in notes

Missile Weapon Standards

  • Define rigid and non-rigid quivers (use rigid material standards?)

Changes to rules

  • also need to update change log page when changes are incorporated
  • should also require the approval of the SCA NZ Inc committee and SCA Ltd Australia Board as they hold the liability.
  • changes to the rules which would affect our exemptions should also include an update to those exemptions from Society Earl Marshal.

Armoured Combat - Marshals Handbook

Armoured Combat - Siege Handbook

Siege Handbook pdf

Editing notes - Siege

Siege Engines and Structures

  • Pick what metric conversion is being used for imperial measurements - 1/2 inch = 12 or 13mm?
  • Change log notes - Adjustment of measurement units, conversion to NZ/Aus English standard spelling

Rapier Combat Handbook

Rapier Editing notes

Rapier - Introduction

  • Rules change process described should match Armoured Combat requirements - announcement in court, publication in Pegasus etc.
  • Update web link to new location when changed

Rapier - Canon

  • Consider separating sections
  1. General Information
  2. Behaviour On The Field
  3. Use of Weapons and Parrying Devices
  4. Acknowledgement of Blows
  5. Melee/War Combat
  • Metric conversion of imperial units

Rapier - Equipment Specifications

  • Metric conversion of imperial units - Armoured Combat uses 6mm for 1/4 inch

Rapier - Authorisations

  • We're keeping indemnities for minors for 21 years??

Rapier - Administration

  • What are SCA Lochac (NZ & AUS) requirements for working with youth?
  • Why is Rapier not under the Group Marshal - as it is at Kingdom level?
  • Chiropracter as health professional?
  • Quarter Courts don't exist anymore - use grievance procedure as per Kingdom Law

Rapier - Glossary

Suggested further glossary items:

Cloak
Draw cut
Tip cut
Push cut
Percussive cut
Blade grasps
Abrasion-Resistant Material
Material that will withstand normal combat stresses (such as being snagged by an unbroken blade) without tearing. Examples include, but are not limited to:
  • broadcloth
  • a single layer of heavy poplin cloth (35% cotton, 65% polyester; "trigger" cloth)
  • sweat pants
  • Woven knit tights or lycra /spandex mix tights.
Nylon pantyhose and cotton gauze shirts are examples of unacceptable materials.
Puncture-Resistant Material
Any fabric or combination of fabrics that passes the Standard Fencing Armour Test set out under rule 3.2.1.5. Examples may include, but are not limited to:
  • 2 mm leather
  • four layers of heavy poplin cloth
  • ballistic nylon rated to at least 550 Newtons
  • commercial fencing clothing rated to at least 550 Newtons.
Kevlar is not an acceptable material, as it degrades rapidly.
Rigid Material
Puncture-resistant materials that will not significantly flex, spread apart, or deform under pressure of 12 kg applied by a standard mask tester repeatedly to any single point. Examples of rigid material that may comply with the standard for Rigid Material are:
  • 0.8 mm stainless steel 1.0 mm mild steel
  • 1.6 mm aluminium, copper, or brass
  • One layer of hardened heavy leather (8oz, 4 mm).
  • The mesh of a standard fencing mask
Resilient Padding
Any material or combination of materials - equivalent to 6mm (0.25 inches) of closed cell foam - which absorbs some of the force of a thrust or blow. The standard padded bib of a fencing mask may meet this requirement, depending on construction.
Standard Fencing Armour Test (SFAT)
used for testing Puncture Resistant Material.
Fleche
running at an opponent with rapier extended
Lists
Melee
Parrying Devices
Non-rigid parrying device
Parrying Gauntlet
Rubber band gun
Pole Weapon
Rapier (referred to as Heavy Rapier in the Society Rules)
Cut and Thrust Rapier.