Difference between revisions of "User:Angele"

Revision as of 04:35, 1 March 2022

Javascipt

The Marshallate

Armoured Combat Editing Notes

Armour requirement

get a diagram of the parts of the hand and wrist which must be armoured.

Missile Weapon Standards

Define rigid and non-rigid quivers (use rigid material standards?)

Changes to rules

also need to update change log page when changes are incorporated
changes to the rules which would affect our exemptions should also include an update to those exemptions from Society Marshal.

Editing notes - Siege

Siege Engines and Structures

Pick what metric conversion is being used for imperial measurements - 1/2 inch = 12 or 13mm?
Change log notes - Adjustment of measurement units, conversion to NZ/Aus English standard spelling

@@ Line 1: / Line 1: @@
-[https://sca.org.nz/wiki/index.php?title=Category:Fighters_Handbook&action=pdfbook&titlePage=Armoured_Combat:Fighters_Handbook_Titlepage Fighters Handbook pdf]
-[https://sca.org.nz/wiki/index.php?title=Armoured_Combat:Handbook Fighters Handbook Landing page]
+[https://sca.org.nz/wiki/index.php?title=MediaWiki:Common.js Javascipt]
-[https://sca.org.nz/wiki/index.php?title=Armoured_Combat:Fighters_Handbook_Titlepage Fighters Handbook Title Page]
+*[[The Marshallate]]
-[https://sca.org.nz/wiki/index.php?title=Armoured_Combat:Change_Log Fighters Handbook Change Log]
+==Armoured Combat Editing Notes==
-[https://sca.org.nz/wiki/index.php?title=Armoured_Combat:Marshals_Handbook Marshals Handbook Landing Page]
+===[[Armoured_Combat:Armour_Requirements|Armour requirement]]===
+*get a diagram of the parts of the hand and wrist which must be armoured.
-[[Rapier:Handbook|Rapier Handbook Landing Page]]
+===[[Armoured_Combat:Missile_Weapon_Standards|Missile Weapon Standards]]===
-==Rapier Editing notes==
+*Define rigid and non-rigid quivers (use rigid material standards?)
-===Rapier - Introduction===
-*Rules change process described should match Armoured Combat requirements - announcement in court, publication in Pegasus etc.
-*Update web link to new location when changed
-===Rapier - Canon===
+===[[Armoured_Combat:Procedures_for_Changes_to_These_Rules|Changes to rules]]===
-*Consider separating sections
+*also need to update [[Armoured Combat:Change_Log | change log]] page when changes are incorporated
-#[[Rapier:General_Information|General Information]]
+*changes to the rules which would affect our exemptions should also include an update to those exemptions from Society Marshal.
-#[[Rapier:Behaviour_On_The_Field|Behaviour On The Field]]
-#[[Rapier:Use_Of_Weapons_And_Parrying_Devices|Use of Weapons and Parrying Devices]]
-#[[Rapier:Acknowledgement_Of_Blows|Acknowledgement of Blows]]
-#[[Rapier:Melee_War_Combat|Melee/War Combat]]
-*Metric conversion of imperial units
-===Rapier - Equipment Specifications===
+==Editing notes - Siege==
-*Metric conversion of imperial units - Armoured Combat uses 6mm for 1/4 inch
-===Rapier - Authorisations===
+===[[Siege:SCA_Siege_Engines_and_Structures|Siege Engines and Structures]]===
-*We're keeping indemnities for minors for 21 years??
+*Pick what metric conversion is being used for imperial measurements - 1/2 inch = 12 or 13mm?
+*Change log notes - Adjustment of measurement units, conversion to NZ/Aus English standard spelling
-===Rapier - Administration===
-*What are SCA Lochac (NZ & AUS) requirements for working with youth?
-*Why is Rapier not under the Group Marshal - as it is at Kingdom level?
-*Chiropracter as health professional?
-*Quarter Courts don't exist anymore - use grievance procedure as per Kingdom Law
-===Rapier - Glossary===
-Suggested further glossary items:
-;Cloak
-;Draw cut
-;Tip cut
-;Push cut
-;Percussive cut
-;Blade grasps
-;Abrasion-Resistant Material
-:Material that will withstand normal combat stresses (such as being snagged by an unbroken blade) without tearing. Examples include, but are not limited to:
-:*broadcloth
-:*a single layer of heavy poplin cloth (35% cotton, 65% polyester; "trigger" cloth)
-:*sweat pants
-:*Woven knit tights or lycra /spandex mix tights.
-:Nylon pantyhose and cotton gauze shirts are examples of unacceptable materials.
-;Puncture-Resistant Material
-:Any fabric or combination of fabrics that passes the Standard Fencing Armour Test set out under rule 3.2.1.5. Examples may include, but are not limited to:
-:*2 mm leather
-:*four layers of heavy poplin cloth
-:*ballistic nylon rated to at least 550 Newtons
-:*commercial fencing clothing rated to at least 550 Newtons.
-:Kevlar is not an acceptable material, as it degrades rapidly.
-:Initially, these materials need only be tested at the marshal's discretion; all other materials must be tested the first time new equipment is used, or if no marshal on the field knows a given piece of equipment to have been tested under rule 3.1.5.
-;Rigid Material
-:Puncture-resistant materials that will not significantly flex, spread apart, or deform under pressure of 12 kg applied by a standard mask tester repeatedly to any single point. Examples of rigid material that may comply with the standard for Rigid Material are:
-:*0.8 mm stainless steel 1.0 mm mild steel
-:* 1.6 mm aluminium, copper, or brass
-:*One layer of hardened heavy leather (8oz, 4 mm).
-:*The mesh of a standard fencing mask
-;Resilient Padding
-:Any material or combination of materials - equivalent to 6mm (0.25 inches) of closed cell foam - which absorbs some of the force of a thrust or blow. The standard padded bib of a fencing mask may meet this requirement, depending on construction.
-;Standard Fencing Armour Test (SFAT) (used for testing Puncture Resistant Material.)
-:Acceptable field inspections shall deliver a consistent force.
-:Tests known to be acceptable include:
-:*Cloth or garment manufacturer's commercial certification that a fabric is rated to 550 N. (Documentation must be available at the time of inspection.)
-:*Use of 550 N garment punch test devices, manufactured by sources acceptable to the Deputy Society Marshal for Rapier Combat. Such a device shall be used in accordance with its instructions.
-:*Use of a drop test device as described in instructions found in Appendix 3 of the Society Rapier Rules.
-:For all tests, if the material in question has been completely penetrated, or penetrated in more than one protective layer, it fails. If only one protective layer (where other equivalent or sturdier layers exist) has been damaged, then it passes.
-;Fleche
-:running at an opponent with rapier extended
-;Lists
-;Melee
-;Parrying Devices
-;Non-rigid parrying device
-;Parrying Gauntlet
-;Rubber band gun
-;Pole Weapon
-;Rapier (referred to as Heavy Rapier in the Society Rules)
-;Cut and Thrust Rapier.

Difference between revisions of "User:Angele"

Revision as of 04:35, 1 March 2022

Contents

Armoured Combat Editing Notes

Armour requirement

Missile Weapon Standards

Changes to rules

Editing notes - Siege

Siege Engines and Structures

Navigation menu

Search