Youth Armoured Combat Draft:Armour Requirements: Difference between revisions

From SCA Lochac
Jump to navigation Jump to search
No edit summary
 
(40 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{DISPLAYTITLE:Youth Armour Requirements}}
<div class='rulesNumbering'  style="counter-reset: page  8">   
<div class='rulesNumbering'  style="counter-reset: page  9">   
==General==
==Armor Requirements==
#These are the rules for the armour that you must wear, but you can also wear more or better armour if that makes you feel safer.
#These are minimum required armor standards.
#We encourage you to make your armour look medieval, but you might need to use modern sports equipment for safety reasons.
#While it is the goal of the SCA to encourage a medieval appearance for all participants, given the specific nature of Youth Combat visible modern sports equipment may be worn as armor.<br />
 
==ALL DIVISIONS:==
==Head - all divisions==
#Head
#Your helm must completely cover your head.  
##Helmets must completely cover the head.  
#You can use a hockey helmet, lacrosse helmet, and other sports helmet with a rigid facemask, but the helmet might need to have parts added or be altered to fully enclose your head.
###Hockey helmets, lacrossehelmets, and other sports helmets with facemasks are acceptable.
#You are allowed to have a period-looking helm.  
###They may need to have additions or alterations to fully enclose the head.  
#Depending on your size and development (how strong you are), the marshal-in-charge may not let you use a helmet that is too heavy for you to wear safely, as the weight becomes a problem rather than helping to protect you.
###Period looking helms are permitted.  
#Your helmet must be constructed of a continuous rigid material.
####Bearing in mind the size and development of the youth, the marshal-in-charge may disallow the use of a helm deemed too heavy for the youth to wear safely.
#Your helmet is not allowed to have "floating" segments that are only attached with straps.
##The helmet must be constructed of a continuous rigid material.
#Your helmet must have a grill, rigid mesh, or a face plate that keeps a weapon from making contact with your face.
###Helmets with "floating" segments, attached only with straps, are not permitted.
##Your helmet must not have any gaps that are bigger than 50 mm in the area protecting your face.
##All helmets must have grills, rigid mesh, or face plates that prevent a weapon from making contact with the face. No helmet shall have a gap exceeding 5 cm in the area protecting the face.
#Your helmet must have a chinstrap or something that does the same thing that will keep your helmet from coming off or touching your face during combat.
##Helmets must have a chinstrap or equivalent means to prevent the helmet from being dislodged or contacting the wearers face during combat.
#Your helmet and neck protection must work together so that a weapon cannot touch any part of your head or neck.
##Helmets in combination with neck protection (such as a gorget or aventail) must be constructed so that a weapon may not touch any exposed area of the head or neck.    
#Your helmet must be padded inside so that the rigid parts of it cannot touch your head.
##Helmets must fit properly and be padded inside so that the rigid portions of it do not contact the head.  
##The padding must be soft enough to be protective, but not so soft that you can squish it and feel the hard surface behind it.
##Padding must provide progressively resistant give.            
#Your helmet can have an aventail or camail (chainmail that hangs off it), or a bevor (rigid neck protection) to help protect your neck.
###The mass of the helmet will not be presumed to provide any additional protection.
 
##Helmets may have hanging aventails, camails, or bevors to aid in protecting the neck.
==Neck==
#Neck             
#Division 1:  You need to protect your throat and larynx with a minimum of light leather (at least 1.6mm thick), or something that provides the same or better protection.
##An aventail, camail, gorget, or coif may be used with a as long as together all required areas are protected.
#Division 2:  You need to cover your larynx, cervical vertebrae, and first thoracic vertebra with a gorget of at least 2.8mm thick leather with 6mm of padding.
#Groin
#Division 3:  You need to cover your larynx, cervical vertebrae, and first thoracic vertebra with a gorget of rigid material or at least 4mm thick heavy leather, with 6mm of padding.  
##Minimum protection is a sports cup or padded skirt until reaching puberty, after which a rigid athletic cup or equivalent armour appropriate to the youths physical characteristcs is required.
#You can wear an aventail, camail, or maille coif instead of a gorget or as well as your gorget, as long as all the areas that have to be protected are covered.
#Feet:  
 
##Participants must wear properly fitting, closed-toe shoes that provide safe reliable footing.  
==Body==
##Open toes, sandals, toe shoes, flip-flops, crocs, etc. are NOT acceptable.
#Division 1: You must have your torso, shoulders and armpits and upper legs covered with at least some cloth. Tunics, shirts, or bodices, and pants, shorts, or skirts are acceptable.  
#Shields
#Division 2: In addition to what you need to wear for Division 1, you need to protect your kidneys with at least 2.8mm thick leather with at least 6mm of padding, or something that provides the same or better protection. We recommend that you wear chest protection of 2.8mm leather or heavy quilted material, or something that provides the same or better protection, but you don't have to.
##Shields may be made of wood, plastic, foam, aluminum, or an equivalent material.  
#Division 3:  In addition to what you need to wear for Division 1 and Division 2, you need to protect your xyphoid process (this is at the bottom of your sternum) with at least 2.8mm thick leather over 6mm of padding, or something that provides the same or better protection.  We recommend that you wear chest protection of 2.8mm leather or heavy quilted material, or something that provides the same or better protection, but you don't have to.
##Shield edges must be covered by plastic tubing, leather, or foam at least 13 mm wide to minimize damage to youth weapons or other fighters.
 
##No wires, bolts, screws, or other objects may project more than 6 mm without padding or tape covering them. Rounded shield bosses are not considered to be projections.
==Groin==
##Shields should be of a shape similar to that used in period.
#If you have testicles, you need to protect them with an athletic cup.
##Shields should be of an appropriate weight for the size and strength of the combatant.
##If the cup has straps to hold it in place, you need to use them. If the cup doesn't have straps, you need to wear something that is designed to keep it in place.
==DIVISION 1==
#If you don't have testicles, we recommend that you wear a padded skirt, 4mm leather or similar groin protection to cover your pubic bone area.
#Neck
 
##The throat and larynx shall be protected by a minimum of light leather or the equivalent.
==Elbow and knee joints==
#Body
#Division 1: You need to wear cloth over your elbows and knees. You could wear a long sleeve shirt and long pants, or a short sleeve shirt and shorts with elbow pad and kneepads.
##All combatants must have the torso, shoulders, and armpits covered with a minimum of cloth. Tunics, shirts, or bodices, and pants, shorts, or skirts are acceptable.
#Division 2: You need to protect your elbows and knees with at least soft pads.
#Elbow and Knee Joints
#Division 3: You need to protect your elbows and knees with rigid material over padding.  You can wear hockey, motocross and other similar sports elbow and kneepads.  
##At a minimum, a layer of cloth must cover the elbows and knees. Elbow and knee joint protection is not required. A long sleeve shirt and long pants, or a short sleeve shirt and shorts with elbow and kneepads meet this requirement.
 
#Hand and Wrist Protection
==Hand and wrist protection==
##A minimum of light gloves is required.
#Division 1:  You need to wear gloves made of cloth, canvas, or thin leather, or something that provides the same or better protection.
==DIVISION 2==
#Division 2:  You need to wear gloves with at least 6mm of padding on the back of your fingers, back of your hand, and your wrist. You can wear street hockey gloves, or if you use a basket hilt, you can wear a cloth or leather glove with extra wrist protection.
#Neck
#Division 3:  You need to wear at least a sports glove with at least 12mm of padding protecting your fingers, back of your hand, and wrist, and extra thumb protection.
##An aventail, camail, gorget , or coif may be used with a as long as in conjunction all required areas are protected.
##You can use ice hockey or lacrosse goalie gloves, or something that provides the same or better protection.
##A minimum of medium leather with padding is required.
##You can wear gauntlets of at least 4mm thick leather or rigid material padded with 6mm of closed cell foam or heavy padding.
##The larynx, cervical vertebrae, and first thoracic vertebra must be covered.
##You can also wear lighter gloves with a basket hilt and additional wrist protection, such as a half gauntlet.
#Body
##You are not allowed to wear street hockey gloves on their own.
##All combatants must have the torso, shoulders, and armpits covered with a minimum of cloth. Tunics, shirts, or bodices, and pants, shorts, or skirts are acceptable.
 
##Kidneys must be protected by a minimum of a medium leather kidney belt with padding or the equivalent.
==Feet:  all divisions==
##It is recommended but not required that youths developing breasts have chest protection.
#You have to wear closed-toe shoes that fit your properly and keep you from slipping. You are not allowed to have open toes, wear sandals, toe shoes, flip-flops, Crocs, etc.
#Elbow and Knee Joints
 
##Elbows and knees must be protected by a minimum of soft pads.
==Shields: all divisions==
#Hand and Wrist Protection
#Your shield is allowed to be made of wood, plastic, foam, aluminium, or something like those.
##A minimum of gloves with at least 6 mm of foam or padding protecting the fingers, back of the hand, and wrist are required. Street Hockey gloves are acceptable, as is a light glove, with extra wrist protection, in a basket hilt.
#The edges of your shield have to be covered by plastic tubing, leather, or foam that is at least 12mm wide to stop it from damaging weapons or other fighters.
==DIVISION 3==
#If your shield has any wires, bolts, screws, or other anything else that sticks out more than 6mm, it needs to be padded or taped. A rounded shield boss doesn't count.  
#Neck
#Your shield needs to be a shape that they actually used in history.
##An aventail, camail, gorget , or coif may be used with a as long as in conjunction all required areas are protected.
#Your shield needs to a size and weight that you can use safely.
##A minimum of rigid material or heavy leather, with padding, is required.  
 
##The larynx, cervical vertebrae, and first thoracic vertebra must be covered.
#Body
##All combatants must have the torso, shoulders, and armpits covered with a minimum of cloth. Tunics, shirts, or bodices, and pants, shorts, or skirts are acceptable
##Kidneys must be protected by a minimum of a medium leather kidney belt with padding or the equivalent.  
##The xyphoid process must be protected by a minimum of medium leather and padding or the equivalent.  
##Youths developing breasts are required to have chest protection of medium leather, heavy quilted material, or the equivalent.
#Elbow and Knee Joints
##Elbows and knees must be protected by rigid material over padding. Hockey, motocross and other similar sports elbow and kneepads are acceptable.
#Hand and Wrist Protection
##A minimum of a sports glove with at least 13 mm of foam protecting the fingers, back of the hand, and wrist, and extra thumb protection, such as those for ice hockey or lacrosse goalies, or equivalent.
##Rigid gauntlets of hardened leather or plastic are prefered.


</div>
</div>
[[Category:Youth_Armoured_Combat_Draft_Handbook | H]]

Latest revision as of 20:05, 6 November 2024

General

  1. These are the rules for the armour that you must wear, but you can also wear more or better armour if that makes you feel safer.
  2. We encourage you to make your armour look medieval, but you might need to use modern sports equipment for safety reasons.

Head - all divisions

  1. Your helm must completely cover your head.
  2. You can use a hockey helmet, lacrosse helmet, and other sports helmet with a rigid facemask, but the helmet might need to have parts added or be altered to fully enclose your head.
  3. You are allowed to have a period-looking helm.
  4. Depending on your size and development (how strong you are), the marshal-in-charge may not let you use a helmet that is too heavy for you to wear safely, as the weight becomes a problem rather than helping to protect you.
  5. Your helmet must be constructed of a continuous rigid material.
  6. Your helmet is not allowed to have "floating" segments that are only attached with straps.
  7. Your helmet must have a grill, rigid mesh, or a face plate that keeps a weapon from making contact with your face.
    1. Your helmet must not have any gaps that are bigger than 50 mm in the area protecting your face.
  8. Your helmet must have a chinstrap or something that does the same thing that will keep your helmet from coming off or touching your face during combat.
  9. Your helmet and neck protection must work together so that a weapon cannot touch any part of your head or neck.
  10. Your helmet must be padded inside so that the rigid parts of it cannot touch your head.
    1. The padding must be soft enough to be protective, but not so soft that you can squish it and feel the hard surface behind it.
  11. Your helmet can have an aventail or camail (chainmail that hangs off it), or a bevor (rigid neck protection) to help protect your neck.

Neck

  1. Division 1: You need to protect your throat and larynx with a minimum of light leather (at least 1.6mm thick), or something that provides the same or better protection.
  2. Division 2: You need to cover your larynx, cervical vertebrae, and first thoracic vertebra with a gorget of at least 2.8mm thick leather with 6mm of padding.
  3. Division 3: You need to cover your larynx, cervical vertebrae, and first thoracic vertebra with a gorget of rigid material or at least 4mm thick heavy leather, with 6mm of padding.
  4. You can wear an aventail, camail, or maille coif instead of a gorget or as well as your gorget, as long as all the areas that have to be protected are covered.

Body

  1. Division 1: You must have your torso, shoulders and armpits and upper legs covered with at least some cloth. Tunics, shirts, or bodices, and pants, shorts, or skirts are acceptable.
  2. Division 2: In addition to what you need to wear for Division 1, you need to protect your kidneys with at least 2.8mm thick leather with at least 6mm of padding, or something that provides the same or better protection. We recommend that you wear chest protection of 2.8mm leather or heavy quilted material, or something that provides the same or better protection, but you don't have to.
  3. Division 3: In addition to what you need to wear for Division 1 and Division 2, you need to protect your xyphoid process (this is at the bottom of your sternum) with at least 2.8mm thick leather over 6mm of padding, or something that provides the same or better protection. We recommend that you wear chest protection of 2.8mm leather or heavy quilted material, or something that provides the same or better protection, but you don't have to.

Groin

  1. If you have testicles, you need to protect them with an athletic cup.
    1. If the cup has straps to hold it in place, you need to use them. If the cup doesn't have straps, you need to wear something that is designed to keep it in place.
  2. If you don't have testicles, we recommend that you wear a padded skirt, 4mm leather or similar groin protection to cover your pubic bone area.

Elbow and knee joints

  1. Division 1: You need to wear cloth over your elbows and knees. You could wear a long sleeve shirt and long pants, or a short sleeve shirt and shorts with elbow pad and kneepads.
  2. Division 2: You need to protect your elbows and knees with at least soft pads.
  3. Division 3: You need to protect your elbows and knees with rigid material over padding. You can wear hockey, motocross and other similar sports elbow and kneepads.

Hand and wrist protection

  1. Division 1: You need to wear gloves made of cloth, canvas, or thin leather, or something that provides the same or better protection.
  2. Division 2: You need to wear gloves with at least 6mm of padding on the back of your fingers, back of your hand, and your wrist. You can wear street hockey gloves, or if you use a basket hilt, you can wear a cloth or leather glove with extra wrist protection.
  3. Division 3: You need to wear at least a sports glove with at least 12mm of padding protecting your fingers, back of your hand, and wrist, and extra thumb protection.
    1. You can use ice hockey or lacrosse goalie gloves, or something that provides the same or better protection.
    2. You can wear gauntlets of at least 4mm thick leather or rigid material padded with 6mm of closed cell foam or heavy padding.
    3. You can also wear lighter gloves with a basket hilt and additional wrist protection, such as a half gauntlet.
    4. You are not allowed to wear street hockey gloves on their own.

Feet: all divisions

  1. You have to wear closed-toe shoes that fit your properly and keep you from slipping. You are not allowed to have open toes, wear sandals, toe shoes, flip-flops, Crocs, etc.

Shields: all divisions

  1. Your shield is allowed to be made of wood, plastic, foam, aluminium, or something like those.
  2. The edges of your shield have to be covered by plastic tubing, leather, or foam that is at least 12mm wide to stop it from damaging weapons or other fighters.
  3. If your shield has any wires, bolts, screws, or other anything else that sticks out more than 6mm, it needs to be padded or taped. A rounded shield boss doesn't count.
  4. Your shield needs to be a shape that they actually used in history.
  5. Your shield needs to a size and weight that you can use safely.


Retrieved from ‘https://sca.org.nz/wiki/index.php?title=Youth_Armoured_Combat_Draft:Armour_Requirements&oldid=7948’