Youth Armoured Combat Draft:Weapon Standards: Difference between revisions

From SCA Lochac
Jump to navigation Jump to search
 
(32 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{DISPLAYTITLE:Weapons Standards - All Divisions}}
<div class='rulesNumbering'  style="counter-reset: page  9">
<div class='rulesNumbering'  style="counter-reset: page  9">
==General==
==General==
#All weapons must be inspected regularly for deteriorated or compromised foam as well as damaged or broken cores or materials components
#You have to get your weapons inspected before you can use them.  The marshal will look for foam that is falling apart, and whether the core of the weapon in damaged or broken, or anything else is damaged or broken.
#No metal may be used in any weapons.  
#Your weapon must not have any metal in it. This includes things like basket hilts, pommel weights, screws, nails or other fasteners, and hose clamps.
##This includes, but is not limited to: basket hilts, pommel weights, screws or other fasteners, and hose clamps.
#You are not allowed to have a flail (a weapon on a rope).
#Flails are expressly prohibited.
#You are not allowed to use materials that might shatter or splinter on impact for the core or cross guard of your weapon.  
#No materials that might shatter or splinter on impact may be used for the core or cross hilts of any weapon.  
#You are not allowed to use PVC (a specific kind of plastic) in any weapon.
#PVC is prohibited.
#The core of your weapon is allowed to be made out of:
#Approved materials for weapon cores are:
##Rattan, either with or without the skin, with a diameter between 19 mm and 25 mm for most weapons.  
##Rattan, either shaved or skin-on, with a diameter between 19 mm and 25 mm for most weapons.  
###Two-handed weapons longer than 165 cm, used in Division 3 only, can use rattan up to 32 mm or less in diameter.
###Two-handed weapons longer than 165 cm, used in Division 3 only, may use rattan up to, but not exceeding 32 mm in diameter.
###Both ends of the rattan must be rounded.
###Both ends of the rattan shall be rounded.
##Common forms of high-density polyethylene (HDPE) pipe (it's used for irrigation and plumbing)
##Common forms of High Density Polyethylene (HDPE) pipe, used for irrigation and plumbing. Examples are Sil-o-Flex and PEX.
###You can use any size of HDPE pipe as long as:
###Any nominal size of HDPE may be used provided the actual outside diameter of the pipe is no less than 19 mm, the youth can securely grip the pipe, and the weapon is within weight limits.  
####the outside diameter of the pipe is 19 mm or bigger
###HDPE pipe shall have both ends capped, plugged, or otherwise covered to prevent the pipe from cutting through the foam.
####you can hold on to it properly
##Other materials may be approved by: the Kingdom Deputy Earl Marshal, in accordance with the procedures in Rule 17 'Experimentation'
####your weapon doesn't weigh too much.
#The striking surface of any weapon shall not be less than 38 mm wide.
###HDPE pipe must have both ends capped, plugged, or otherwise covered to prevent the pipe from cutting through the foam.
#Thrusting tips and cutting edges shall be marked in a contrasting color.
##The Kingdom Youth Armoured Combat Marshal can only approve other materials after they have been properly tested and prove that they are good enough, and are included in the rules.
#Wrist straps, lanyards, and triggers are recommended but not required.
#The striking surface of your weapon must at least 38 mm wide.
#Pommels, cross-guards, and the butt ends of weapons without butt spikes must be covered with at least 9 mm closed cell foam and covered with a loose single layer of duct tape or cloth.
#You have to mark the thrusting tips and cutting edges with a different colour than the rest of the weapon.
#Weapons may not exceed 75 grams in weight per 10 cm of length.
#We recommend that you have a wrist strap or a lanyard, so you don't accidentally throw your weapon away if you drop it, but you don't have to.
#If a weapon has a head,
#The pommels, cross-guards, and the butt ends of your weapons that don't have butt spikes have to be covered with at least 9 mm of closed cell foam and covered with a loose single layer of duct tape or cloth.
##it must be constructed solely of lightweight foam.
#Your weapon has to weigh less than 75g per 10cm of length. If your weapon is 1m long, it can't weight more than 750g.
##The head shall be firmly and securely attached to the haft.  
#If your weapon has a head:
##Striking surfaces shall have compression characteristics similar to those without a defined head.
##It can only be made of lightweight foam.
==Single-Handed Weapons==
##It has to be firmly and securely attached to the haft.  
#Striking surfaces must be covered with at least 9 mm of closed cell foam extending 25 mm or more past the end of the core material. The foam must be covered with a single loose layer of duct tape or a cloth sleeve.
##The striking surfaces of your weapon have to be as squishy as a weapon that doesn't have a head.
#Thrusting tips shall be constructed of closed cell foam covered with duct tape or cloth. They must extend 5 cm past the end of the core and be at least 6.5 cm in diameter.
#Thrusting tips should be constructed so that they do not fold over.
#Basket hilts are permitted on single-handed weapons.


==Two-Handed Weapons==
==Single-handed weapons==
Two-handed weapons, including those which may be used with one or two hands, shall have the following requirements:
#The striking surfaces of your weapon must be covered with at least 9 mm of closed cell foam that covers more than 25 mm past the end of the core material. The foam must be covered with a single loose layer of duct tape or a cloth sleeve.
#Two-handed weapons shall be constructed in the same way as single-handed weapons except as outlined below.
#Thrusting tips must be constructed of closed cell foam covered with duct tape or cloth. They must extend 5 cm past the end of the core and be at least 6.5 cm in diameter.  
#Given the excessive flexibility of HDPE in warm temperatures, it is recommended that these cores be limited to single-handed weapons except in Division 1.
#Thrusting tips must be constructed so that they do not fold over.
#No weapon may have a cutting and/or smashing surface at both ends.
#Your weapon is allowed to have a basket hilt that is not made of metal.
#Weapons exceeding 180 cm shall not be used for cutting or smashing and shall be used for thrusting only (spears).


==Thrown Weapons==
==Two-handed weapons==
#These weapons may be used for striking and may also be thrown in melee scenarios where thrown weapons are allowed. Examples are thrust-and-throw javelins and axes.
#If you have a two-handed weapon (including ones that you can also use with just one hand), it needs to be made the same way as a single-handed weapon, but there are some extra rules that they need to follow.
#Throwing axes may be used in any division and are constructed from only closed cell foam and tape.
#You are not allowed to make two-handed weapons for Divisions 2 or 3 out of HDPE pipe as they get too bendy when its hot. You can use it for Division 1 weapons.
#Axes shall not be excessively large or heavy.
#Your two-handed weapons is not allowed to have cutting and/or smashing surface at both ends.
#Javelins are constructed from a single diameter of HDPE pipe and may be used in melee combat in Divisions 2 and 3.  
#Your weapon has a maximum length:
##They may be thrown or be used as a single-handed thrusting weapon
##In Division 1, it is not allowed to be longer than 1.5 meters.
##The thrusting tip must conform to standard weapon thrusting tips.
##In Division 2, it is not allowed to be longer than 1.65 meters.
##The butt end may not be used offensively. It must be padded with foam in such a manner that it will not penetrate a 5 cm opening.  
##In Division 3, it is not allowed to be longer than 2.25 meters.
##Fins or stabilizers of foam or duct tape may be attached near the back end.  
#If your weapon is longer than 1.8 metres, it's a spear and it is only allowed to be used for thrusting. You are not allowed to use it for cutting or smashing.
##must be between 125 and 165 cm long.
 
==Thrown weapons==
#You are allowed to use throwing weapons to strike at people, as well as throwing them in battles when thrown weapons are allowed.
===Throwing Axes===
#You can use a throwing axe in any division.
#A throwing axe is made entirely out of closed cell foam and tape.
#Your axe is not allowed to be excessively large or heavy. It still has to weigh less than 75g per 10cm of length.
 
===Javelins===
#You can used javelins in melee combat in Divisions 2 and 3
#Javelins are made from a single length of HDPE pipe.
##They can be thrown or be used as a single-handed thrusting weapon.
##The thrusting tip on your javelin must be made the same way as the thrusting tip for a single-handed weapon.
##You are not allowed to use the butt end of your javelin to attack someone.
##The butt end of your javelin must be padded with foam so that it is too big to fit through a 5 cm opening.  
##You are allowed to put fins or stabilisers of foam or duct tape on the back end of your javelin.
##Your javelin has to be between 125 and 165 cm long.




</div>
</div>
[[Category:Youth_Armoured_Combat_Draft_Handbook | I]]
[[Category:Youth_Armoured_Combat_Draft_Handbook | I]]

Latest revision as of 06:19, 3 October 2024

General

  1. You have to get your weapons inspected before you can use them. The marshal will look for foam that is falling apart, and whether the core of the weapon in damaged or broken, or anything else is damaged or broken.
  2. Your weapon must not have any metal in it. This includes things like basket hilts, pommel weights, screws, nails or other fasteners, and hose clamps.
  3. You are not allowed to have a flail (a weapon on a rope).
  4. You are not allowed to use materials that might shatter or splinter on impact for the core or cross guard of your weapon.
  5. You are not allowed to use PVC (a specific kind of plastic) in any weapon.
  6. The core of your weapon is allowed to be made out of:
    1. Rattan, either with or without the skin, with a diameter between 19 mm and 25 mm for most weapons.
      1. Two-handed weapons longer than 165 cm, used in Division 3 only, can use rattan up to 32 mm or less in diameter.
      2. Both ends of the rattan must be rounded.
    2. Common forms of high-density polyethylene (HDPE) pipe (it's used for irrigation and plumbing)
      1. You can use any size of HDPE pipe as long as:
        1. the outside diameter of the pipe is 19 mm or bigger
        2. you can hold on to it properly
        3. your weapon doesn't weigh too much.
      2. HDPE pipe must have both ends capped, plugged, or otherwise covered to prevent the pipe from cutting through the foam.
    3. The Kingdom Youth Armoured Combat Marshal can only approve other materials after they have been properly tested and prove that they are good enough, and are included in the rules.
  7. The striking surface of your weapon must at least 38 mm wide.
  8. You have to mark the thrusting tips and cutting edges with a different colour than the rest of the weapon.
  9. We recommend that you have a wrist strap or a lanyard, so you don't accidentally throw your weapon away if you drop it, but you don't have to.
  10. The pommels, cross-guards, and the butt ends of your weapons that don't have butt spikes have to be covered with at least 9 mm of closed cell foam and covered with a loose single layer of duct tape or cloth.
  11. Your weapon has to weigh less than 75g per 10cm of length. If your weapon is 1m long, it can't weight more than 750g.
  12. If your weapon has a head:
    1. It can only be made of lightweight foam.
    2. It has to be firmly and securely attached to the haft.
    3. The striking surfaces of your weapon have to be as squishy as a weapon that doesn't have a head.

Single-handed weapons

  1. The striking surfaces of your weapon must be covered with at least 9 mm of closed cell foam that covers more than 25 mm past the end of the core material. The foam must be covered with a single loose layer of duct tape or a cloth sleeve.
  2. Thrusting tips must be constructed of closed cell foam covered with duct tape or cloth. They must extend 5 cm past the end of the core and be at least 6.5 cm in diameter.
  3. Thrusting tips must be constructed so that they do not fold over.
  4. Your weapon is allowed to have a basket hilt that is not made of metal.

Two-handed weapons

  1. If you have a two-handed weapon (including ones that you can also use with just one hand), it needs to be made the same way as a single-handed weapon, but there are some extra rules that they need to follow.
  2. You are not allowed to make two-handed weapons for Divisions 2 or 3 out of HDPE pipe as they get too bendy when its hot. You can use it for Division 1 weapons.
  3. Your two-handed weapons is not allowed to have cutting and/or smashing surface at both ends.
  4. Your weapon has a maximum length:
    1. In Division 1, it is not allowed to be longer than 1.5 meters.
    2. In Division 2, it is not allowed to be longer than 1.65 meters.
    3. In Division 3, it is not allowed to be longer than 2.25 meters.
  5. If your weapon is longer than 1.8 metres, it's a spear and it is only allowed to be used for thrusting. You are not allowed to use it for cutting or smashing.

Thrown weapons

  1. You are allowed to use throwing weapons to strike at people, as well as throwing them in battles when thrown weapons are allowed.

Throwing Axes

  1. You can use a throwing axe in any division.
  2. A throwing axe is made entirely out of closed cell foam and tape.
  3. Your axe is not allowed to be excessively large or heavy. It still has to weigh less than 75g per 10cm of length.

Javelins

  1. You can used javelins in melee combat in Divisions 2 and 3
  2. Javelins are made from a single length of HDPE pipe.
    1. They can be thrown or be used as a single-handed thrusting weapon.
    2. The thrusting tip on your javelin must be made the same way as the thrusting tip for a single-handed weapon.
    3. You are not allowed to use the butt end of your javelin to attack someone.
    4. The butt end of your javelin must be padded with foam so that it is too big to fit through a 5 cm opening.
    5. You are allowed to put fins or stabilisers of foam or duct tape on the back end of your javelin.
    6. Your javelin has to be between 125 and 165 cm long.