Armoured Combat Draft notes:Missile Weapon Standards: Difference between revisions

From SCA Lochac
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
==Changes to Chapter 10 - Missile Weapon Standards==
Example change log
;10.3.8 in Arrows and bolts
==Missile weapons standards==
:
===Section name===
;Rule number
:(leave blank)
;Was
;Was
:Blunts must be secured using a strip of good quality 13mm-wide electrical or fibre tape wound down around the sides of the blunt for at least 13mm, and then up onto the shaft of the arrow for 25mm as per figure 10.1. Blunts must be firmly secured to the shaft so that they cannot come off on impact or if the shaft is broken. To allow inspection of possible punch-through the face of the blunt must not be covered.
:Text of old rule
;Now
;Now
:Blunts must be firmly secured to the shaft by good quality electrical or fibre tape so that they cannot come off on impact or if the shaft is broken. To allow inspection of possible punch-through, the face of the blunt must not be covered.
:New version of text
;Functional change
;Functional change
:Removed specification for width of tape
:What, if anything, has chanegd in what people are or aren't allowed to do
;Reason
;Reason
:As long as the tape is sufficient to keep the head on, the width of the tape used is irrelevant. Often not followed (nor checked).
:Why is this rule changing?
;For notes section
;Heading to describe change - date of change (to go on the Notes page)
:November 2023 - The requirement for tape used to secure blunts to be exactly 13mm wide has been removed. As long as the tape is suffcient to keep the blunt on the shaft securely, you can use other width tape.
:Explanation text for what and why.
<hr>
<hr>

Revision as of 08:44, 25 July 2024

Example change log

Missile weapons standards

Section name

Rule number
(leave blank)
Was
Text of old rule
Now
New version of text
Functional change
What, if anything, has chanegd in what people are or aren't allowed to do
Reason
Why is this rule changing?
Heading to describe change - date of change (to go on the Notes page)
Explanation text for what and why.
Retrieved from ‘https://sca.org.nz/wiki/index.php?title=Armoured_Combat_Draft_notes:Missile_Weapon_Standards&oldid=7621’