Siege Draft:Combat - Siege Ammunition: Difference between revisions

From SCA Lochac
Jump to navigation Jump to search
(Created page with "=Siege Ammunition= #No siege engine ammunition may exceed 0.45 kilograms in weight. #Siege Class Ammunition must be coloured with yellow tape as described below, in order to denote it as Siege Class Ammunition. #Siege ammunition may not be fired from small arms or thrown by hand. #All Siege ammunition will be labelled for the purpose of identification in line with requirements for arrows. #Siege Ammunition may only be constructed of the following materials: ##Open-cell o...")
 
Line 1: Line 1:
=Siege Ammunition=
=Siege Ammunition=
#No siege engine ammunition may exceed 0.45 kilograms in weight.
#Siege engine ammunition must not be heavier than 0.45 kilograms in weight.
#Siege Class Ammunition must be coloured with yellow tape as described below, in order to denote it as Siege Class Ammunition.
#Siege class ammunition must be coloured with yellow tape as described below, in order to denote it as siege class ammunition.
#Siege ammunition may not be fired from small arms or thrown by hand.
#Siege ammunition is not allowed to be fired from small arms or thrown by hand.
#All Siege ammunition will be labelled for the purpose of identification in line with requirements for arrows.
#All siege ammunition must labelled for the purpose of identification in line with requirements for arrows.
#Siege Ammunition may only be constructed of the following materials:
#Siege ammunition is only allowed to be constructed of the following materials:
##Open-cell or closed-cell foam.
##Open-cell or closed-cell foam.
##Tennis balls. Tennis balls shall be punctured with a hole which may not exceed 2 millimetres in diameter, or a slit which may not exceed 3.75 centimetres, in order to relieve internal pressure.
##Tennis balls
#Siloflex used in Siege ammunition must meet one the following three sets of standards:
###Tennis balls must be punctured with a hole less than 2 millimetres in diameter, or a slit less than 3.75 centimetres, in order to relieve internal pressure.
#High-density polyethylene (HDPE) pipe (commonly used as irrigation pipe) used in siege ammunition must meet one the following three sets of standards:

Revision as of 08:17, 10 November 2024

Siege Ammunition

  1. Siege engine ammunition must not be heavier than 0.45 kilograms in weight.
  2. Siege class ammunition must be coloured with yellow tape as described below, in order to denote it as siege class ammunition.
  3. Siege ammunition is not allowed to be fired from small arms or thrown by hand.
  4. All siege ammunition must labelled for the purpose of identification in line with requirements for arrows.
  5. Siege ammunition is only allowed to be constructed of the following materials:
    1. Open-cell or closed-cell foam.
    2. Tennis balls
      1. Tennis balls must be punctured with a hole less than 2 millimetres in diameter, or a slit less than 3.75 centimetres, in order to relieve internal pressure.
  6. High-density polyethylene (HDPE) pipe (commonly used as irrigation pipe) used in siege ammunition must meet one the following three sets of standards: