Fencing Draft notes:Weapons And Defensive Equipment
Jump to navigation
Jump to search
Changes for v6.0
5.1.2
- Was
- ...Example of rigid material that may comply with the standard are:
- 0.8mm stainless steel or 1mm mild steel
- 1.6mm aluminium, copper or brass
- One layer of hardened heavy leather (225g/8oz; 4mm).
- Now
- ...Examples of rigid material that may comply with the standard are:
- 0.8mm stainless steel or 1mm mild steel
- 1.6mm aluminium, copper or brass
- One layer of hardened heavy leather (225g/8oz; 3.2mm).
- Functional change
- Heavy leather may be lighter than previously listed
- Reason
- The handbook currently has two conflicting definitions of heavy leather. This standardises and aligns with Society rules at 3.2mm
- For notes section
- April 2023 - The handbook previously had two contradicting definitions of 8oz heavy leather. We have settled on 3.2mm for 8oz leather to be consistent with Society rules.
5.2.4
- Was
- Not in rules
- Now
- Bladed weapons must not have more than one blade
- Functional change
- Adds requirement that bladed weapons may only have one blade.
- Reason
- To align with 6.2.4 of Society level rules.
- For notes section
- April 2023 - Added requirement for blade weapons to only have one blade as per Society rules.
5.3
- Was
- Sword and dagger blades used in Lochac can be made of steel or fibreglass.
- Now
- The use of fiberglass blades is listed in Society's Exceptions to Allowed Blades rules
- Functional change
- None
- Reason
- The use of fibreglass blades is not currently listed in Society Fencing rules, so linking to the document that currently provides for us to continue to use them.
- For notes section
- April 2023 - Approval has been sought from the Society Rapier Marshal and US Board of Directors for a variance to use fibreglass blades in Lochac on an ongoing basis. At present, approval only exists in an appendix to the previous Society Fencing rules, and is not referenced elsewhere, but still published on the Society website. This variance will allow Lochac to continue to use fibreglass blades should that document be removed.
5.4.2.b
- Was
- The blunt must have a minimum size of 9mm on any surface that strikes the opponent.
- Now
- The blunt must have a minimum size of 10mm on any surface that strikes the opponent.
- Functional change
- Increase in required blunt size by 1mm
- Reason
- In line with other blunt definitions in the handbook
- For notes section
- April 2023 - Blunt size has been increased to 10mm from 9mm to make it consistent throughout the handbook.
5.6
- Was
- 5.6.1 General
- You can use two kinds of spears for fencing combat in Lochac. These are:
- rubber-headed spears
- steel-headed spears.
- Now
- 5.6 Spears
- 5.6.1 - You can use rubber-headed spears for fencing combat in Lochac. You cannot use steel-headed spears.
- Subsequent rules from what was 5.6.2 become subrules of 5.6 (5.6.2-7, and what was 5.6.3 Steel-headed spears is removed entirely.
- Functional change
- Steel-headed spears are no longer permitted in Lochac or the rest of Society.
- Reason
- Steel spears are not permitted for fencing combat after 31 December 2021, at the direction of the Society Marshal.
- For notes section
- April 2023 - Steel spears were no longer not permitted for fencing combat after 31 December 2021, at the direction of the Society Marshal.
5.7.2.10
- Was
- Not in rules
- Now
- Rubber tubing used to make ammunition must have a minimum diameter of 6 mm while at rest.
- Functional change
- Rubber tubing used to make rubber band gun ammunition now has a minimum tube diameter
- Reason
- To align with 6.4.3 of Society level rules (though Society rules state "in flight", which is not measurable).
- For notes section
- April 2023 - Added rule about diameter of rubber tubing used for rubber band ammunition to align with Society Fencing rules.
5.8.2.4
- Was
- Not in rules
- Now
- Non-standard defensive equipment includes, but is not limited to:
- bucklers with a spike or projection more than two inches perpendicular to the main plane of the buckler or the central boss, whichever is applicable. The central boss does not count as a spike or projection.
- bucklers with additions which could reasonably be expected to trap or catch a blade (such as rings or hooks);
- axes;
- Talhoffer "judicial duelling shields" and Talhoffer bucklers;and
- bucklers made out of uncommon materials, such as vegetables, children’s toys, etc.
- Fencers should use common sense when applying this definition and be conservative when considering if a defensive item is non-standard, especially when a less-experienced fighter is concerned if an object would be safe to fence against.
- Functional change
- More items may now clearly be defined as non-standard.
- Reason
- Current language around non-standard defensive equipment is unclear, is limited in scope, and is open to interpretations. A change is needed to assist in clarity while also protecting fencers from potentially advanced tools. A blanket approval for these items would allow barely-authorised fencers to use a tool which could be safe in the hands of an expert, but not a newer fencer. This is a mid point compromise between banning for safety, and blanket approval.
- "Non-standard" defensive items require the marshal and opponent to agree to their use.
- For notes section
- April 2023 - Previous language around non-standard defensive equipment was open to interpretations. A change was needed to assist in clarity while also protecting fencers from potentially advanced tools. A blanket approval for these items would have allowed barely-authorised fencers to use a tool which could be safe in the hands of an expert, but not a newer fencer. The wording used is a mid-point compromise between banning for safety, and blanket approval.