Armoured Combat notes:Melee Weapon Standards: Difference between revisions

From SCA Lochac
Jump to navigation Jump to search
Line 23: Line 23:


;Construction requirement for Polypropylene ('polypro') swords - June 2015
;Construction requirement for Polypropylene ('polypro') swords - June 2015
:Effective immediately, all polypro swords in use in Lochac must either;
All polypropylene swords in use in Lochac must either;
:# have at least 3 layers of fibre tape ( that has the lengthways fibers, not cross hatch tape), run along both blade faces over the tip of the sword; or
:# have at least 3 layers of fibre tape ( that has the lengthways fibers, not cross hatch tape), run along both blade faces over the tip of the sword; or
:# webbing belt or a leather strip along the blade face and over the tip.
:# webbing belt or a leather strip along the blade face and over the tip.
:This measure is designed to prevent the end of the stick flying off in the event of breakage.
:This measure is designed to prevent the end of the stick flying off in the event of breakage.
:All marshals are to ensure this direction has been complied with or the weapon bounces and shall not be allowed on the field.


[[User:Angele|Angele]] ([[User talk:Angele|talk]]) 22:33, 26 June 2018 (NZST)
[[User:Angele|Angele]] ([[User talk:Angele|talk]]) 22:33, 26 June 2018 (NZST)

Revision as of 00:41, 28 June 2018


Editing required

  • Footnote re towball covers can be removed but this exemption is now no longer relevant due to the existence of low-profile thrusting tips.
  • "Restraints are not required on great weapons or spears used single-handed, or on single-handed back-up weapons less than 45 centimetres in length." Society rules don't include a max length for back-up single-handed weapons not requiring lanyards. Is this a specifically Lochac thing?
  • incorporate changes from rulings below

Angele (talk) 22:33, 26 June 2018 (NZST)

Actual notes

Towball caps - June 2001
Duke Eringlin, Society Marshal gave Lochac a dispensation to use 46mm towball caps.
Siloflex - May 2005
Siloflex is a brand name and is not available in Australia or New Zealand. The approved equivalent for Lochac is OD 32mm (approx ID 25mm), medium density, black polyethylene water pipe, 12 bar pressure rating.
Striking surface (A clarification via Society Earl marshal) - October 2013
Because of the nature of our activities and the ability of our weapons to break during use the "striking surface" of a weapon is to be considered throughout the entire striking portion, blade, or head, of the weapon, not only the outside "skin" or layer. This includes all interior construction materials and parts no matter how "deep" inside.
Please note that this means materials such as 'chopping board' plastic may not be used for the construction of weapon heads.
Rubber weapon heads - October 2013
The 'Acorn roller' rubber mace heads are legal for use in Lochac.
The rubber 'Talhoffer' pole axe heads are legal for use in Lochac.
Construction requirement for Polypropylene ('polypro') swords - June 2015

All polypropylene swords in use in Lochac must either;

  1. have at least 3 layers of fibre tape ( that has the lengthways fibers, not cross hatch tape), run along both blade faces over the tip of the sword; or
  2. webbing belt or a leather strip along the blade face and over the tip.
This measure is designed to prevent the end of the stick flying off in the event of breakage.

Angele (talk) 22:33, 26 June 2018 (NZST)

Quarterstaves - June 2018
The use of quarterstaves for combat in the SCA is not expressly forbidden in the 2018 Marshals Handbook, so that statement has been removed from the rules. The rules continue to prohibit weapons from having a cutting and/or smashing heads at both ends.

Angele (talk) 19:31, 27 June 2018 (NZST)