Fencing Draft notes:Inspections: Difference between revisions

From SCA Lochac
Jump to navigation Jump to search
No edit summary
No edit summary
Line 132: Line 132:


;Was 3.2.3.1-2 now 12.3.3.1-2 in Inspecting spears
;Was 3.2.3.1-2 now 12.3.3.1-2 in Inspecting spears
:References relating to metal headed spears and tehir requirements have been removed.
:References relating to metal headed spears and their requirements have been removed.
;For notes
;For notes
:June 2023 - Metal headed spears were removed from use in Society Fencing in December 2021.
:June 2023 - Metal headed spears were removed from use in Society Fencing in December 2021.
Line 147: Line 147:
;For notes
;For notes
:June 2023 - You shouldn't need to apply more pressure than can be comfortably applied by the wrist when flex testing spear heads.
:June 2023 - You shouldn't need to apply more pressure than can be comfortably applied by the wrist when flex testing spear heads.
<hr>
===6.2.3.1.a===
;Was
:For rubber-headed spears, check that the tip is flexible, and returns substantially to its original shape within 3 seconds.
;Now
:Check that the rubber tip is flexible, and returns substantially to its original shape within 3 seconds.
;Functional change
;None
;Reason
:Only rubber-headed spears may be used.
;For notes section
:April 2023 - Process updated to remove reference to steel-headed spears.
===6.2.3.1.b===
;Was
:For metal-headed spears, follow the inspection methods for a bladed weapon.
;Now
:Removed
;Reason
:Metal-headed spears are no longer permitted
===6.2.3.1.b (replacement)===
;Was
:Not in rules
;Now
:A marshal should not use significant force to make a spear head bend; you should not need more pressure than can be comfortably applied by the wrist. If in doubt and where possible, a second marshal should be used to judge the flexibility of the spear head.
;Functional change
:Sets a more objective measure of flexibility
;Reason
:Most objects can be subject to significant tensile strength and many can return to their original shape within 3 seconds. As written, and as evidenced by some newer spear head designs, a marshal can apply a significant tensile load to a spear head (up to and including significant pressure from a hip whole body movement) to make a spear head "pass". This is unacceptable and unsafe. This is a stop-gap solution until a broader Society flex-test can be developed (underway).
;For notes section
:April 2023 - Spear head flex testing - Most objects can be subject to significant tensile strength and many can return to their original shape within 3 seconds. As previously written, a marshal could apply a significant tensile load to a spear head (up to and including significant pressure from a hip whole body movement) to make a spear head "pass". This was unacceptable and unsafe. The current wording is is a stop-gap solution until a broader Society flex-test can be developed.
<hr>
<hr>



Revision as of 09:05, 27 June 2023

Changes for Inspections

Was 3.2 in Rules for marshals, now 12.1 Inspections - General
Moved be with other inspection information.

Was 3.2.1, now 12.1.1 in General
Was
If you are an authorised Fencing Marshal, you can check equipment to make sure it complies with the rules. Information about fencing equipment is in Chapter 5 - Rules for equipment.
Now
If you are an authorised Fencing Marshal, you can check equipment to make sure it complies with the rules. Requirements for fencing equipment are in Protective equipment and Weapons and defensive equipment.
Reason
Updated links to updated sections.

Was 3.2.2, now 12.1.2 in General
Was
Your job includes:
  • making sure each fencer is wearing all of their protective clothing and equipment, and that it is fitted properly, with no skin visible and only incidental gaps between each item.
Now
Your job includes:
  • making sure each fencer is wearing all of their protective clothing and equipment, and that it is fitted properly, with only incidental gaps between each item.
Functional change
No visible skin is not a requirement as incidental gaps are permitted.
Reason
No visible skin is not a requirement as incidental gaps are permitted.

Was 3.2.4, now 12.1.4
Was
Some defensive objects are classified as non-standard. You are responsible for deciding if non-standard equipment complies with the rules and can be used on the field.
Now
Some defensive objects are classified as non-standard. The Fencing Marshal-in-Charge is responsible for deciding if non-standard equipment complies with the rules and can be used on the field.
Functional change
The Fencing Marshal-in-Charge is the one who can decide on non-standard equipment, rather than just any Fencing Marshal
Reason
Prevents marshal hunting to allow an item.

Was 3.2.5 and 3.2.5.a, now 12.1.5 in General
Was
You can rule that a piece of equipment does not meet these rules and cannot be used:
a. If that happens, the equipment can be changed or repaired; then it must be brought back to you so that you can inspect it again (it cannot be taken to another marshal unless you delegate the issue).
Now
You can rule that a piece of equipment does not meet these rules and cannot be used. If that happens, the equipment can be changed or repaired, and then it must be brought back to you so that you can inspect it again. It cannot be taken to another marshal unless you delegate the issue.
Reason
Merged into single rule for simplicity.

Was 3.2.6, now 12.1.6 in General
Was
If you are not sure about a piece of equipment, you can seek advice from another marshal or the Marshal-in-Charge.
Now
If you are not sure about a piece of equipment, you should seek advice from another marshal or the Marshal-in-Charge.
Reason
Marshals really should ask advice if they are unsure.

Was 6.1.1 Inspecting protective equipment - General, now 12.2.1 Overall inspection
6.1.1.1-2 moved to be the first two rules of 12.2.1 Overall inspection, and subsequent rules renumbered
Reason
Better fit for rules.

Was 6.1.1.2, now 12.2.1.2 in Inspecting protective equipment
Was
You might have to ask the fencer to touch or manipulate their protective equipment to check that it meets the rules and fits properly. You should avoid touching the fencer when carrying out a COVID-safe inspection (see section 6.4).
Now
You might have to ask the fencer to touch or manipulate their protective equipment to check that it meets the rules and fits properly.
Functional change
COVID requirements removed
Reason
COVID requirements removed.
For notes section
June 2023 - COVID requirements for inspections have been removed.

Was 6.1.2.4, now 12.2.1.6 in Overall inspection
Was
Check that the fencer is wearing rigid neck protection.
Now
Check that the fencer is wearing rigid neck protection. You must inspect the neck protection on the fencer with the mask off to ensure it sits properly and covers the required areas.
Functional change
Neck protection must be inspected with helm off to ensure coverage requirements
Reason
General inspection practice is to lift up the hood to see if a gorget is being worn. An incident at Festival had this, without realising that the gorget was too low and not safely protecting the fencer's throat. This change would address this
For notes section
June 2023 - following an incident where a low gorget was obscured by a hood, neck protection must be inspected with the mask/helm off to ensure that it sits properly and covers the required areas.

Was 6.1.4, now 12.2.3.2 in Inspecting gloves
Was
Note: Stitches in sewn leather can cause small gaps at the seams. These should be acceptable if there is no sign of the seam coming apart.
Now
Note: Stitches in sewn leather can cause small gaps at the seams. These should be acceptable if there is no sign of the seam failing during combat.
Functional change
Gloves can have small gaps at the seams
Reason
Society rules permit incidental gaps, so it's only really a problem if it's going to fall apart while fighting

Was a note for 6.2.2, now 12.3.2.1-2 in Inspecting rubber band guns
Was
Note: rubber band guns must be inspected in a place that is out of range of any unarmoured participants or spectators. The people conducting the inspection (the marshal and the combatant) must wear full face protection during the inspection.
Now
1. Rubber band guns must be inspected in a place that is out of range of any unarmoured participants or spectators.
2. The people conducting the inspection (the marshal and the combatant) must wear full face protection during the inspection.
Subsequent rules have been renumbered
Reason
They are requirements.

12.3.2.3 in Insepcting rubber band guns
Insert new rule
It is recommended, but not required, that the operator is shot (wearing full protection) by their own weapon – if you are not comfortable being hit by something, maybe you shouldn't be hitting other people with it!
Subsequent rules renumbered
Functional change
None, it's optional.
Reason
Formalising common practice.

Was 3.2.3.1-2 now 12.3.3.1-2 in Inspecting spears
References relating to metal headed spears and their requirements have been removed.
For notes
June 2023 - Metal headed spears were removed from use in Society Fencing in December 2021.

12.3.3.1.b in Inspecting spears
Insert new rule
A marshal should not use significant force to make a spear head bend; you should not need more pressure than can be comfortably applied by the wrist. If in doubt and where possible, a second marshal should be used to judge the flexibility of the spear head.
Functional change
Limit placed on the amount of pressure than can be applied to bend a spear head to test flexibility.
Reason
Most objects can be subject to significant tensile strength and many can return to their original shape within 3 seconds. As written, and as evidenced by some newer spear head designs, a marshal can apply a significant tensile load to a spear head (up to and including significant pressure from a hip whole body movement) to make a spear head "pass". This is unacceptable and unsafe. This is a stop-gap solution until a broader Society flex-test can be developed (underway).
For notes
June 2023 - You shouldn't need to apply more pressure than can be comfortably applied by the wrist when flex testing spear heads.

Was 6.3.3, now 12.4.3 in Inspecting defensive objects
Was
Check any non-standard offensive parts.
Now
Check any non-standard parts. Remember that the Fencing Marshal-in-Charge is responsible for approving non-standard defensive objects.
Functional change
Non-standard isn't limited to offensive parts. Fencing Marshal-in-Charge is responsible for approving non-standard defensive object.
Reason
Non-standard isn't limited to offensive parts, and a reminder that the Fencing Marshal-in-Charge is now responsible for approving non-standard defensive objects.
For notes
June 2023 - A reminder that the Fencing Marshal-in-Charge is now responsible for approving non-standard defensive objects.